MAGIC FX POWER DROP SET

DROP IT LIKE
IT'S HOT.

  1. HOME.
  2. FX HARDWARE
  3. DROP.
  4. POWER DROP SET
MFX1504-POWER-DROP-SET-01.JPG

POWER DROP SET

The POWER DROP SET is a complete dropping set, consisting of 10 POWER DROPS and 10 curtain clamps. Packed in a robust flight case. The set can be used to unveil stages, buildings, products or special objects.

Our POWER DROP SET consists of high quality, powerful Kabuki drop devices for safe and quick drops. Using a Neutrik® powerCON connector enables you to control the devices separately, or to pair them up on each other.

SKU:
MFX1504
Article GTIN:
8718627665558

Specifications.

Length 52 cm
Width 35 cm
Height 33 cm
Weight 18.5 kg
Voltage 230 Vac 50/60 Hz
Power 30 W
Control Direct on-off
Capacity Up to 20 kg per POWER DROP, recommended distance between POWER DROPS: 1 m
Not included Power cable not included
Warranty 3 years

DOWNLOADS.

Download the user manual for installation and safety instructions. Or download the product sheet for information about the materials of the product.
POWER DROP MANUAL

Related

Accessories.

MFX0308-SCHUKO-TO-NEUTRIK-POWERCON-CABLE-1.5M.jpg
Schuko to Neutrik® powerCON cable
No image available
Neutrik® powerCON link cable

The POWER DROP is designed and constructed to safely drop backdrops. The device can be mounted on a firm truss construction. It should be mounted vertically underneath the truss.

For heavy dropping objects, we recommend using multiple POWER DROPs to increase the maximum loading capacity. Use curtain clamps to attach the dropped object to the power drop. Place a device on one side of the object and another device on the other side. When using heavy objects, place multiple POWER DROPs. Install them approximately one meter apart from each other.

The easy plug and play system makes it very user-friendly. Connect the first device with a Schuko to Neutrik® powerCON cable and link other devices with a powerCON link cable, and you’re good to go.

Connect the POWER DROP to a 230 V source to test if all drops have been connected correctly. The blue LED on the devices should indicate if they’re working properly.

Using a banner, flag or any other object that doesn’t have punch holes? Check out our curtain clamps. Those clamps will assure you that every object is DROPpable!